+248.735.7000
CS@USIgroups.com

Denso Protal 7125 Brush Grade

$414.43$490.11

Denso Protal 7125 is specifically formulated to be applied to colder substrates at colder ambient temperatures. It is a high build liquid coating that is brush or spray applied in one coat to many areas of in-service pipelines or during pipeline construction in the field. It cures fast to allow quick handling and backfilling, even down to -4°F (-20°C). Denso Protal 7125 is intended for use where a quick cure is required at lower substrate and/or ambient conditions such as during winter applications or on colder operating temperature pipelines.

Sizes:

Denso Protal 7125 Brush Grade – 0.8 Liter Kit – 8/Case

Denso Protal 7125 Brush Grade – 1.5 Liter Kit – 4/Case

Download the Denso Protal 7125 Technical Data Sheet (TDS)

Description

Denso Protal 7125 is specifically formulated to be applied to colder substrates at colder ambient temperatures. It is a high build liquid coating that is brush or spray applied in one coat to many areas of in-service pipelines or during pipeline construction in the field. It cures fast to allow quick handling and backfilling, even down to -4°F (-20°C). Protal 7125 is intended for use where a quick cure is required at lower substrate and/or ambient conditions such as during winter applications or on colder operating temperature pipelines.

Used as a rehabilitation coating for existing low temperature in-service operating pipelines, station piping, girth welds, tie-ins, push rack (laybarge applications), repairs to FBE, fittings and fabrication. It may also be used for new construction where colder temperatures exist and preheating or post heating is not practical or feasible.

Denso Protal 7125 Features:

• Cold temperature application down to -4°F (-20°C)
• Will not freeze when applied to substrates below 32°F (0°C)
• Fast cure, fast initial set
• Will cure when submersed in water after application
• High build (up to 50 mils / 1270 microns in one coat)
• Excellent adhesion (compliments FBE coated pipe)
• High abrasion resistance for drilling applications
• Can be used as an abrasion resistant coating (ARO)
• Does not shield cathodic protection
• Repair cartridges available (50 ml and 825 ml)

Additional information

Weight N/A
Dimensions N/A

Reviews

There are no reviews yet.

Be the first to review “Denso Protal 7125 Brush Grade”

You may also like…

Subscribe for special pricing and industry trends

[]