+248.735.7000
CS@USIgroups.com

Pump Refurbishment

Pump Refurbishment

The Problem

A cold-water pump at a coal-fired power station had been earmarked for refurbishment after a routine maintenance inspection due to heavy “wear and tear” that it had been subjected to over many years of use.

The client sought a high-performance coating that would protect the pump, but not affect its efficiency.

The Substrate

Metal

The Solution

pump with resimental 202 ceramic repair fluid applied

The surfaces of the pump to be coated were abrasive blast cleaned to a minimum industry standard of NACE Grade 2 prior to the application of two coats of our solvent-free ceramic epoxy coating.

RESIMETAL 202 Ceramic Repair Fluid in contrasting colors grey and blue was applied to ensure thorough application and complete coverage.

RESIMETAL 202 Ceramic Repair Fluid provides a smooth, low-friction finish as well as optimum levels of physical and mechanical strength, and superior resistance to erosion and corrosion. It is ideal for use as a resurfacing and lining system in fluid environments.

Products Used

Related Articles

Nitrogen Line Pipe Rehabilitation

The Problem This 6” 180-psi Nitrogen Line that was suffering from severe corrosion supplied a key chemical manufacturer. Unconventional Solutions

Generator Building

The Problem   A wastewater company wanted to invest in stopping corrosion by protecting their generator building from the outside

Power Plant Roof Repair

The Problem The roof on this major power plant was neglected as the plant was scheduled for closure in three