The Problem The EPA was about to fine this automotive engine manufacturer for the condition of their secondary containment. One of the issues was that if this tank leaked, the…
Read more
The Problem This concrete wall was cracking due to the fact of the Great Lakes freeze through cycle. It had been replaced several times before. The Substrate Concrete The Solution…
Read more
The Problem A steel mill in Michigan was experiencing heavy corrosion issues in the elevator shaft of one of their blast furnaces. The steel mill wanted the product to be…
Read more
The Problem Leeching Trench Repair: This steel mill had a severely corroded secondary containment area caused by hydrochloric acid at elevated temperatures continuously hitting their trench. USI was called in…
Read more
The Problem This steel water tower had become damaged over a period of time and required refurbishing. The customer was looking for a high-performance long-term repair solution. The Substrate…
Read more
The Problem A significant wind tower was suffering from severe corrosion due to prolonged exposure to harsh environmental conditions, it needed Wind Tower Corrosion Repair. The damage over time necessitated…
Read more
The Problem This tunnel carries cables to a large supermarket. It was suffering problems with water ingress and high humidity. The high levels of humidity within the tunnel itself were…
Read more
The Problem An automotive component supplier faced a significant challenge with one of their key pieces of equipment – a rubber-coated roller. This roller, vital for feeding textile blanks into…
Read more
The Problem An automotive manufacturing company was hearing heavy vibration of a fan shaft on top of the roof, so they called Unconventional Solutions out for an emergency repair to…
Read more
The Problem This client had concrete steps and entryways in their foyer that needed repair going into the buildings that needed some type of coating that would be more durable…
Read more
