Concrete Repair and Overcoat
The Problem Due to hydrochloric acid in the environment, the concrete piers of this pickling line were severely corroded and had started to crumble the concreted needed to be repaired…
Read more
The Problem Due to hydrochloric acid in the environment, the concrete piers of this pickling line were severely corroded and had started to crumble the concreted needed to be repaired…
Read more
The Problem The EPA was about to fine this automotive engine manufacturer for the condition of their secondary containment. One of the issues was that if this tank leaked, the…
Read more
The Problem This concrete wall was cracking due to the fact of the Great Lakes freeze through cycle. It had been replaced several times before. The Substrate Concrete The Solution…
Read more
The Problem Leeching Trench Repair: This steel mill had a severely corroded secondary containment area caused by hydrochloric acid at elevated temperatures continuously hitting their trench. USI was called in…
Read more
The Problem This steel water tower had become damaged over a period of time and required refurbishing. The customer was looking for a high-performance long-term repair solution. The Substrate…
Read more
The Problem A significant wind tower was suffering from severe corrosion due to prolonged exposure to harsh environmental conditions, it needed Wind Tower Corrosion Repair. The damage over time necessitated…
Read more
The Problem This tunnel carries cables to a large supermarket. It was suffering problems with water ingress and high humidity. The high levels of humidity within the tunnel itself were…
Read more
The Problem An automotive component supplier faced a significant challenge with one of their key pieces of equipment – a rubber-coated roller. This roller, vital for feeding textile blanks into…
Read more