The Problem The original coating had failed following an incident when a valve had leaked and 3 quarts of 95% sulfuric acid had spilled onto the containment area lining. As…
Read more
The Problem A wastewater company was looking for a cost-effective and durable repair solution for their tank chimes. There was a 1½ in. gap that needed to be repaired and…
Read more
The Problem A bridge at a large steel mill was experiencing severe corrosion they needed corrosion protection for their steel bridge. The traditional method of grit blasting to prepare the…
Read more
The Problem This hospital landing pad is a critical part of the hospital where emergencies are flown in. It was vital that it remained operational. The lights and cables around…
Read more
The Problem A university’s hospital was looking to spend $450,000 to purchase a new chiller. Instead of replacement USI provided them with a plan for chiller refurbishment. USI was able…
Read more
The Problem The wastewater treatment plant, operational since 1956, faced significant safety concerns due to the age and condition of its concrete steps and needed concrete stair repairs. These original…
Read more
The Problem The client faced significant challenges due to an issue with concrete leveling at their facility. A substantial movement joint, measuring between 2.4 to 3.0 inches, had developed between…
Read more
The Problem A chemical plant was seeing aggressive chemical attack on their floor. The customer had a cocktail of different chemicals that could be present at any given moment so…
Read more
The Problem The sewage axial flow pump at this wastewater treatment plant was damaged and no longer functioning at peak efficiency. The company was looking for a cost-effective solution to…
Read more
The Problem The rotary sewage pump housing at this wastewater treatment plant was starting to wear, and the company was looking for a way to protect it before serious damage…
Read more
