ABSTRACTThe use of horizontal directional drills (HDDs) is an ever-increasing pipeline installation technique. As HDDs increase, there is an increased probability for coating damage, even when coated with traditional mill or field applied…
Read more
PROBLEM Inline Pump Rebuild: The veins on this vertical inline pump for a cooling tower at a refinery had severe abrasion wear because of the 30 years of service it…
Read more
PROBLEM Tank Farm Fuel Line Coating: A contractor responsible for maintaining a tank farm with airport jet fuel lines encountered significant challenges in their coating process. The jet fuel lines,…
Read more
PROBLEM This hydraulic cylinder on an automotive assembly line hoist was scored and pitted causing loss of hydraulic oil, efficiency, and a hydraulic fluid puddle that could lead to a…
Read more
The Problem USI was approached for a heavy-duty floor protection system suitable for the concrete floors operating in an aggressive industrial environment. The ideal system would offer longevity in service…
Read more
The Problem The floor of this candy factory in Indiana was being brutally attacked by citric and lactic acid. This caused the concrete to become cracked and pitted over time.…
Read more
The Problem The original coating had failed following an incident when a valve had leaked and 3 quarts of 95% sulfuric acid had spilled onto the containment area lining. As…
Read more
The Problem A wastewater company was looking for a cost-effective and durable repair solution for their tank chimes. There was a 1½ in. gap that needed to be repaired and…
Read more
The Problem A bridge at a large steel mill was experiencing severe corrosion they needed corrosion protection for their steel bridge. The traditional method of grit blasting to prepare the…
Read more
The Problem This hospital landing pad is a critical part of the hospital where emergencies are flown in. It was vital that it remained operational. The lights and cables around…
Read more
