Resimac High Temperature Resistance Coatings
Key considerations before selecting a high-temperature coating
Environmental Use:
- Is this an external protective coating or an internal lining?
- Will the system be subject to CUI (Corrosion Under Insulation) risks?
Chemical Exposure:
- Is there exposure to water, hydrocarbons, acids or alkalis?
- What type of chemicals are present, and at what concentration (ppm)?
- Are they continuous exposures or occasional contact
Temperature Profile:
- What is the constant operating temperature?
- What are the intermittent or peak temperatures?
- How often will the equipment cycle between hot and cold?
Mechanical & Process Conditions:
- Is there thermal shock or rapid temperature change?
- Is the coating subject to abrasion, erosion or impact?
- Will there be pressurized steam or immersion service?
Engineering Repair Metals
- Resistant to dry heat up to 464°F and immersion up to 356°F
- High build application up to 1 inch without slumping
- No shrinkage, distortion, or warping during or after curing
- Resists high temperature fluid flow environments up to 356°F immersion or wet heat and 464°F dry heat
- Suitable for hydrocarbon and aqueous immersion
- Steam-out testing at 428°F / 220°C for 100 hours with no blistering
- Cures at 212-464°$ with no shutdown required
- Solvent-free and surface-tolerant
- Excellent corrosion protection at elevated temperatures
- Single-component, heat-activated epoxy novolac
Resichem 560 Thermal Barrier XF
- Prevents corrosion under insulation (CUI) for long-term durability
- Insulative epoxy coating that minimizes heat transfer & energy loss
- Presents condensation build-up to reduce moisture related damage
Duromar 4300 – High Performance Lining
- Abrasion-resistant, trowel applied
- Temperatures up to 450°F
- Resists high-temperature fluid flow environments up to 265°F wet & 464°F dry-heat
- Suitable for hydrocarbon and aqueous immersion
- Resists high-temperature fluid flow environments uo to 230°F wet and 464°F dry heat
- Withstands continuous immersion in acidic conditions
A unique high-build single-package inert multi polymeric matrix coating designed to provide heat stability and withstand severe cyclic conditions up to 1200°F. It is an excellent choice for coating under insulation (CUI), stacks, chemical plant components, refineries and other areas that require corrosion protection and see elevated temperatures up to 1200°F and -300°F or cryogenic temperatures
Questions asked during the Tech Talk:
- What type of surface prep is required? (8:44)
- How easy is it to repair or to recoat? (10:37)
