Resimetal 102 Metal Repair Fluid – 1 KG

Description

Resimetal 102 Metal Repair Fluid is a two-component, 100% solids, solvent-free epoxy repair fluid designed to resurface and protect metallic surfaces. Its brushable consistency fills pitting, scarring and corrosion damage on mechanically abraded or abrasive-blasted surfaces, and once cured it forms a durable protective layer with high mechanical adhesion to metal substrates.

102 Metal Repair Fluid can also be used as an anti-slip metal coating: apply at 500 microns (20 mil) and broadcast aluminum oxide aggregate onto the wet surface for a hard-wearing, slip-resistant finish on steps, ramps and conveyor rollers.

Product Benefits

• Brushable Application – Resurfaces and protects metal using a standard brush or rubber float.
• High Mechanical Adhesion – Tensile shear of 2,630 psi (ASTM D1002) and pull-off adhesion of 3,480 psi (ASTM D4541) on blasted steel.
• Anti-Slip Capability – Combine with a broadcast aggregate to create slip-resistant metal surfaces.
• High Strength – Compressive strength of 15,300 psi (ASTM D695) and flexural strength of 10,000 psi (ASTM D790).
• Corrosion Resistant – Minimum 5,000 hours salt spray resistance (ASTM B117).
• Solvent-Free, No Sag – 100% solids with no sag at 3 mm (1/8″) on vertical surfaces.

Typical Applications

• Damaged flanges
• Leaking tank seams
• Damaged hulls on vessels
• Anti-slip flooring, steps and ramps
• Conveyor rollers
• Pitted, scarred or corroded metal surfaces

Military Qualification

• Qualified to MIL-PRF-24176C, Type I and II

Technical Specifications

• Mixing Ratio: 8:1 by weight / 3:1 by volume
• Usable Life: 30 minutes at 68°F
• Machinable: 2 hours at 68°F
• Full Cure: 3 days at 68°F
• Heat Resistance: Immersion up to 140°F; dry heat up to 392°F (load dependent)
• Hardness: Shore D 84
• Coverage (1 kg kit): 4.73 ft² at 40 mil; 2.37 ft² at 80 mil; 1.57 ft² at 1/8″
• Shelf Life: 5 years unopened, stored dry at 59–86°F

Resimetal 102 is part of the Resimac Resimetal 100 Series of metal repair products. For help choosing the right repair system for your application, contact Unconventional Solutions.