Generator Building

Generator Building

The Problem

 

A wastewater company wanted to invest in stopping corrosion by protecting their generator building from the outside elements. Instead of allowing corrosion to continue they thought it was important to protect this asset.

The Substrate

Metal

The Solution

USI started the prep by water blasting the area. Then one coat of Resichem 506 Aluprime was applied on all of the existing rust spots that were left.  Two coats of Resichem 555 Resinox were brush and rolled on.  This will provide them with 15 years of corrosion protection from the outside elements

Products Used

Resichem 506 Aluprime

Resichem 555 Resinox

Related Articles

Resimac High Temperature Resistance Coatings

https://youtu.be/yhHMtyxni68?si=zIFxYk3nRn0aSH8i Key considerations before selecting a high-temperature coating Environmental Use: Is this an external protective coating or an internal lining?

Wastewater East Drainpipe Repair

The Problem A school was experiencing issues with a wastewater drainpipe that had multiple holes and cracks. The damaged pipe