Vertical Inline Pump for Cooling Tower
PROBLEM The veins on this vertical inline pump for a cooling tower at a refinery had severe abrasion wear because of the 30 years of service it provided. The client…
Read more
PROBLEM The veins on this vertical inline pump for a cooling tower at a refinery had severe abrasion wear because of the 30 years of service it provided. The client…
Read more
The Problem The floor of this candy factory in Indiana was being brutally attacked by citric and lactic acid. This caused the concrete to become cracked and pitted over time.…
Read more
The Problem A university’s hospital was looking to spend $450,000 to purchase a new chiller, in which installation would cost over $1 million. They couldn’t get the new chiller because…
Read more
The Problem This hospital landing pad is a critical part of the hospital where emergencies are flown in. It was vital that it remained operational. The lights and cables around…
Read more
The Problem The client was having problems with a very wide movement joint (2.4 – 3.0 inches) between a building and the external concrete. This was causing difficulties for fork-lift…
Read more
The Problem This wastewater treatment plant wanted to improve plant safety to mitigate the risk of trip, slip and fall issues. The steps were original from 1956 opening of plant…
Read more
The Problem The carbon steel impeller of this dust extraction fan had been subjected to heavy wear as a result of the very aggressive operating conditions. The fan is used…
Read more
The Problem Our client had existing Chillers that had never been coated before. Upon inspection, they noticed a lot of Galvanic corrosion and pitting on the tube face sheet and…
Read more
The Problem A chiller operator at a large stadium was concerned with corrosion inside one of their chillers. Hearing about our solutions for corrosion protection and prevention, they decided to…
Read more
The Problem This church was having issues with moisture in the steeple at the roof line. This moisture was penetrating the roof and going into the ceiling, causing issues with…
Read more